Chop saws are typically pre set to cut material at a 90 degree angle, whereas Miter saws can be adjusted to cut materials at various angles. But the hazards of using either type of saw are very similar. Here are a few tips to remember when you are operating a Chop saw or a Miter saw.
Disclaimer:
This article is provided solely as a reference tool to be used for information purposes only. The information in this article shall not be construed or interpreted as providing legal or any other advice. The information material does not amend the provisions of any insurance policy issued by CompSource Mutual. It is not a representation that coverage does or does not exist for any particular claim or loss under any such policy. Coverage depends on the facts and circumstances involved in the claim or loss, all applicable policy provisions, and any applicable law.
Monthly safety training agenda-Drywall Click the link to view the complete monthly safety training agenda for drywall work. This document
https://loggingsafety.com/wp-content/uploads/2020/06/93a15web.pdf This brochure has been developed in accordance with existing OSHA requirements. However, recommendations are not to be construed as
Para ver en español, haga clic en el siguiente enlace: Injuries happen from slips, trips, and falls in every industry.
